SBC PCD2.M5 Series - Hardware Settings Option

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
CPUs
Conguration
8-5
8
TheconnectionofthePCDtothecongurationwithPG5viathePCiscomplete.
The hardware settings can now be changed and programming the application can
begin.
8.1.2 "Hardwaresettings"option
ThePCD2.M5_CPUsdonothaveany"jumpers”tobeset.AswithearlierPCDsys-
tems,thesettingsareenteredinPG5onthe“HardwareSettings”screen.Afteryou
have selected the desired settings, they will be loaded into the PCD2.M5_ when you
click“Download...”.
If "Upload..." is pressed, the current sttings for the CPU will be displayed.
Example: PCD2.M5540 settings