SBC PCD2.M5 Series - Page 176

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Analogue input modules, electrically isolated
Input/output (I/O) modules
6-64
6
Programming
Classic: ThereisanFBoxforprogrammingthemodules.
xx7andRIOs: Thermwarereadsinthevaluesaccordingtotheconguration
(I/OBuilderornetworkcongurator)
Watchdog:Thismodulecanbeusedonallbaseaddresses;thereisnointeraction
with the watchdog on the CPUs.
Fordetails,pleaserefertothe"Watchdog" section, which describes the correct use
of the watchdog in conjunction with PCD2 components.