SBC PCD2.M5 Series - Page 194

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Analogue combined input/output modules
Input/output (I/O) modules
6-84
6
Outputs
General:
Resolution: 12 bit
Number of channels: 2
Galvanic separation of the PCD: yes
Galvanic separation of external supply: yes
Galvanic separation between channels: no
Type of connections: two cables per channel
Congurationofoperatingmode: usingsoftware(FBOX,FB)
Accuracy at 25 °C: ± 0.5% max.
Repeat accuracy: ± 0.1% max.
Temperaturedrift(0…55°C)max.: ± 70 ppm/°C
Overcurrent protection: short circuit protected
Timeconstantforlter: 1 ms
Voltage mode:
Max.loadtomaintainspeciedaccuracy: > 700 Ω
Resolution range 0 … 10 V: 12Bit;2.44mVperLSB
Current mode:
Operating resistance: < 600 Ω
Resolution range 0 … 20 mA: 12Bit;4.88µA per LSB
Resolution range 4 … 20 mA: 11.7Bit;4.88µA per LSB
General details
Current consumption at I/O bus +5V: max. 40 mA
Current consumption at I/O bus V+: no load
Temperature range: 0..0.55 °C
External power supply
(ThesamepowersupplycanbeusedasforthePCDwithoutlosingthegalvanicseparation
oftheinputs/outputs.)
Operating voltage: 24 V ±4 V smoothed
Current consumption: max.2.5W(dependingonoutputload)
Terminals: Plug-in14-polescrewclamps(PCD2.W525;
item no: 4 405 5002 0, supplied with
module),
for cables up to 1.5 mm²