Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Installation instructions and relay contacts
Annex
A-8
A
Sizing aid:
The value C is derived directly from the current to be carried. The value of resistance R
is found by drawing a straight line between the relevant points on the I and R curves and
reading the resistance at the intersection with the R curve.
Verbraucher
Example:
U = 100 V I = 1 A
C is calculated directly as 0.1 μF
R = 10 Ω(intersectionwithRscale)
To Next Page
Loading...
