Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Memory space on the PCD
PCD2.M5_ Classic CPUs and expansion housings
3-33
3
Thesecond,optionallycongurablepartisreferredtoinPG5as"extensionmemory
backup"(databackup)andcanbeusedtobackupDBsandtextstotheashduring
runtime.
If part of the backup memory is used as "extension memory backup", the available
"user backup memory" is reduced by twice the amount of "extension memory back-
up" used. In parallel with the reduction of the "user program memory backup", the
user program memory is also adjusted, so the total user program memory can be
copiedtothebackupash.
Available user backup memory
System RAM user program
memory
Flash user backup
(prg + data)
Default memory
conguration
5440
5540
1024 Kb 1024 Kb 48k prg lines,
64k txt, 256k ext.
Notethatinthedefaultmemoryconguration,eachprogramlinerequires4bytes.
Anyashmemorymodulesuitableforuserprogrambackup(e.g.aPCD7.R500)can
beusedasaashcard.Wheremultiplecompatiblemodulesareconnected,therst
modulefromtheleftwillbeused(SlotM1,M2).
Flash memory modules (optional)
ForthePCD,therearevariousashmemorymodulesfordifferentapplications.
Someofthesemodulesareexplicitlydesignedforaparticularuse(e.g.thePCD7.
R500foruserprogrambackup).However,thereareothermodulesavailablefor
varioustypesofstorage(e.g.thePCD7.R551M04,whichcontains1MBofmemory
spacefortheuserprogrambackupand3MBthelesystem).
Mostashmemorymodulesaresimplecards(PCD7.Rxxx),whichcanbeplugged
into a PCD2.M5xxx0 in Slot M1 or M2.
Flash memory modules for the le system
Apartfromtheashmemoriesmentionedaboveforbackinguptheuserprogram
memoryandDBs,thereisanothertypeofashmemoryavailableforles.These
memorymodulescanbeusedtosave"PC-readable"lessuchaswebpages,
imagesorlogles.Thecontentoftheseashmemorymodulescanbeaccessedvia
thewebserver,theFTPserver(forPCD2withEthernetinterfaceonly)andtheuser
program.