SBC PCD2.M5 Series - Page 71

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
E-display with PCD7.D3100E nano-browser
PCD2.M5_ Classic CPUs and expansion housings
3-58
3
Config PCD SysUser
** Root Page **
31/10/2013 9:45:05
SAIA BURGESS CONTROLS
Changing a numeric value
SelectaeldwithanumericvalueusingthejoystickandthenpressENTER.
Example:
● Selectvalue:movejoystickupordowntoincreaseordecreasevalue
 (0123456789+-)
● Presslefttoselecttheleft-handdigit.Theperformthesameoperationasfor
the previous digit
● Whenyoureachtherightvalue,pressENTER
● Changeapplied
Changing an alphanumeric character
Selectaeldwitheditablenumericvalueoralphanumericcharacter(smallletteronly)
with the navigation switch then press ENTER.
Example:
Changing the html user start page.
-Changeone(orseveral)character(s)
Selecttheuserstarthtmleldthenpressingenter.Movethecursorleftandrightwith
the navigation switch to select the character that you want to change, then move the
navigation switch up and down to select the new character.
-Addonecharacteratrstposition
Selecttheuserstarthtmleldthenpressingenter,therstcharacterisselected.
Move the cursor with navigation switch left and select the character that you want to
add then press enter.
→‘start.html’ becomes ‘astart.html’
-Inordertodeleteacharacterat„end“positionhecanjustmakeaspacesign“out”
ofthecharacteryouwanttodelete.->‘start.html’becomes‘start.htm‘->‘start.htm’)