Page 58 of 86 SCHÄFER IT-Systems
Industriestraße 41 D-57518 Betzdorf
Phone: +49 (0) 2741/283-770 sales@schaefer-it-systems.de www.schaefer-it-systems.de As
amended on 16/8/2019 (subject to technical changes)
10.4. Save, cache and import settings
10.4.1. Save the current monitoring settings
10.4.2. Save the current monitoring settings
To save the current settings in an external file, select "System menu" >> "Export" >> "Export current settings" >>
Select which "parameters" should be cached >> Press "OK" >> to get the file "settings.sit”.
10.4.3. Import saved settings
To restore / install the saved settings, go to: "System menu" >> "Firmware" >> "Select file" >> "Browse"
"System menu" >> "Firmware" >> "Select file" >> "Browse" >> Select file "settings.sit" >> Press "Load">
> Press to save the current settings in flash memory.
The monitoring settings are not saved after a restart. Even if you click "OK" or "Apply" in each
configuration.
To save after restart, you need to press to save the current settings in flash memory.
To be able to perform this process, you must be logged on as an administrator.
To be able to perform this process, you must be logged on as an administrator.
Each "parameter" uploaded to the system replaces the current "parameters" in the system.
To Next Page
Loading...
Need help?
General