Schäfer iQdata RMS 222 User Manual

Page 21 of 86 SCHÄFER IT-Systems
Industriestraße 41  D-57518 Betzdorf
Phone: +49 (0) 2741/283-770  sales@schaefer-it-systems.de  www.schaefer-it-systems.de As
amended on 16/8/2019 (subject to technical changes)
User Manual
6)
Carefully insert the top cover so that all sides of the cover fit in
and all connections match the panel cut-outs.
4.2. Vibration probe
Article number
7808260
iQdata RMS vibration probe
Dimensions / weight
Width (W):
18 mm
Depth (D):
60 mm
Height (H):
18 mm
Weight:
50g
Connection:
RJ11 Port
1x for connection to the RMS
Auto detection:
Yes
Cascadable:
Yes, up to 10 units (will be indicated in the system as sensors)
Extendable:
Up to 100m
Power consumption:
60mW
Vibration sensor for detecting vibrations in
critical areas. This sensor can used to
monitor network cabinets for vibrations
that can damage hard drives, or to detect
whether a network cabinet has been
tampered with.
The sensor is connected to a free sensor
port on the RMS and then automatically
detected by the RMS system.

Schäfer iQdata RMS 222 Specifications

General

Brand	Schäfer
Model	iQdata RMS 222
Category	Measuring Instruments
Language	English