Page 79 of 86 SCHÄFER IT-Systems
Industriestraße 41 D-57518 Betzdorf
Phone: +49 (0) 2741/283-770 sales@schaefer-it-systems.de www.schaefer-it-systems.de As
amended on 16/8/2019 (subject to technical changes)
Enter the server address, the ping time, the estimated return time between sending a request and receiving a
response and press "OK".
11.9. Create timers
You can use the timer to plan the events in the system. When the timer is triggered, it changes from the normal
state to the alarm state.
When the timer is deactivated, it will return to normal.
To create a "Timer" utility, press the Add button in the "System Tree" menu. Then select "Timer". A modular
window appears:
The "ping time" must not be less than 5 seconds.
If you get the message: "Element data cannot be updated", check that the "ping time" is not less than 5
seconds. Or try clearing the browser cache and reloading the page.
To Next Page
Loading...
Need help?
General