Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Unscrew bolts -arrows- and detach gearbox support.
– Attach lifting tackle - T40013- to gearbox and close lock.
– Attach workshop crane - VAS 6100- with hooks - 10 - 222 A /
2- to lifting tackle.
– Unscrew bolts -1, 2, 3, 6, 7, 8, 9- of the connection between
gearbox and engine.
Note
Ignore -items 4, 5-and-A-.
– Detach gearbox from engine.
1.2.2 Separating engine and gearbox, vehi‐
cles with 7-speed dual clutch gearbox
Special tools and workshop equipment required
Ateca 2017 ➤ , León 2013 ➤ , León ST 2013 ➤
4 cyl. petrol engine (1.8 l and 2.0 l with direct injection, 4 V, exhaust gas turbocharger, timing chain,
EA 888 III. Gen) - Edition 10.2018
1. Removing and installing the engine 31
To Next Page
Loading...
