100
www.sauservice.com
● If you wipe the unit using a moist cloth, make sure that the unit is completely dry.
● When you are reattaching the RW guide upper, attach the lock arm to the RW guide upper.
RW GUIDE UPPER
ROLLER
● Wipe any dirt off the surfaces that touch the IC cards. Clear any foreign matter that has collected in the
unit. The roller is a small component, so take the same precautions that you would for the screws to avoid
losing it.
LOCK ARM
PHOTO 11. 1 h
PHOTO 11. 1 i
To Next Page
Loading...
