24
www.sauservice.com
● Connect the internal billboard connector to
the connector in the PTV ceiling.
● Attach the connector lid using the single truss screw.
● Bring the main cabinet next to the PTV.
PHOTO 6. 3 e
BILLBOARD INTERNAL CONNECTOR
● Connect the wiring between the main cabi-
net and the PTV. You will need to connect a
total of 5 connectors.
● Place the main cabinet on the supports in
the PTV base. Make sure that the wires do
not get pinched while you do this.
PTV CEILING CONNECTOR
PHOTO 6. 3 f
CONNECTOR (5)
SUPPORT
MAIN CABINET
Be careful not to pinch the wiring.
PHOTO 6. 3 g
To Next Page
Loading...
