14 User’s Manual
2.3.4 Wireless Network Option –
This option is used to provide a wireless connection between multiple DAQlink III units.
The Wireless Option includes one Wireless Access Point and one Wireless Station. Typically
two DAQlink III units and a computer can be connected with only one Wireless Network Option.
The wireless option works well in “line of sight” operation, distances up to 2 km can operate
without any problems. However, in some areas where line of sight is limited, the Wireless
Option is also limited, and range can be limited to 50 meters or less. Multiple Wireless Network
options (repeaters) can be added to increase the range of the system.
Unit is powered by +12 volt through the POE connection on the Ethernet patch cable.
To Next Page
Loading...