Seismic Source DAQlink III - Memory Window - Stacking Operation; Auto Stack Operation

78 User’s Manual
5.6 Memory Window – Stacking Operation
The memory window is used to stack multiple records in real time. Go to the Option –
Memory selection to open the memory window. The Option – Preferences – Auto operation
settings are also used to set up automatic stacking and storing of multiple records. Each record is
stored in memory and can be saved to the database.
5.6.1 Auto Stack Operation
The “Auto Stave, File Export and Stack” menu can be used to automate the stacking
and saving process. See section 5.4.9 through 5.4.11.
When Auto Stack is enabled the following “Hot Keys” can be used:
“ESC” Stops Acquisition
“Clear” button on Tool Bar will reset Stack number to “1”
“F2” Ends Stack – Saves current Stack and Clears Stack number