90 User’s Manual
5.9 Vscope “HotKeys”
The following “Hotkeys” can be used with the Vscope Program. These “HotKeys” allow
quick access to functions without having to use the mouse and the mouse buttons.
“A” – Start Acquisition
“ESC” – Stops Acquisition – also exits some menus
“Ctrl S” – Save Data to database
“Ctrl O” – Open Database Explorer to load record
“Ctrl R” – Repeat Start – Auto Start On/Off
Stack “Hot Keys” - used when Auto Stack selected
“Esc” – Stops Acquisition
“Ctrl L” – Clears Stack resets counter
“Ctrl S” – Save Stack at anytime
“F2” – Save and Start new Stack
Confirm Save Menu
“Y”, “Enter” – Save
“N”, “Esc” – Do Not Save
Confirm Stacking
“Y”, “Enter” – Add to stack
“N”, “Esc” – Do Not add to stack
Plots
“Ctrl N” – new plot
“Ctrl I” – invert plot On/Off
“Ctrl D” – remove DC offset On/Off
“Ctrl X” – Axis settings
“Ctrl F” – Full view
Real Time Noise Monitor
“N” enables/disables Real Time Noise for the Noise Bar Graph
Filters
“Ctrl T” – High Cut On/Off
“Ctrl Z” – Low Cut On/Off
“Ctrl Y” – Notch On/Off
To Next Page
Loading...