50 User’s Manual
While in the database explorer, all records can be selected by pressing ctrl A (or go to Edit-
Select All Menu).
After selecting all of the records, you can eliminate records that you do not want to
export. Move the mouse to the record that you would like to omit from the list. Hold the ctrl
button and press the left mouse button once. Then go to the next record to omit and hold the ctrl
key and press the left mouse button. Continue until all of the records to be omitted have been
selected.
After selecting all the records, go to the Record – Export menu, (or select Export button
on Toolbar) to export the selected records.
Pressing the left mouse button once will unselect the record from the list. The record will
show highlighted until another record has been selected.
Doing a double click of the left mouse button will select the stack function.
Holding the ctrl button and pressing left mouse once will unselect record, holding ctrl
button and pressing left mouse button again will reselect the record.
When storing multiple records to the VScope data files (*.vs2), all of the selected records
will be stored to one *.vs2 file. The multiple record *.vs2 file can only be loaded while in the
database explorer menu. Use the Records –Import menu (or use the Import button on the
Toolbar) to load the *.vs2 file.
When storing multiple records to SEG-Y or SEG-2 file format, each selected record will
be saved to a different file name. The name that is entered in the “save as” window will be used
along with the record # to create the file name.
To Next Page
Loading...