Sel 551 - Page 114

SET.8 of 12 Settings Sheets for the SEL-551 Relay
Text Settings (SET T Command)
SEL-551 Relay Instruction Manual Date Code 20110408
Date________________
Output Contacts (see Figure 3.23)
Output Contact OUT1 OUT1 =
Output Contact OUT2
OUT2 =
Output Contact OUT3
OUT3 =
Output Contact OUT4
OUT4 =
Display Points (see Rotating Default Display on page 6.11)
Display Point DP1 DP1 =
Display Point DP2
DP2 =
Display Point DP3
DP3 =
Display Point DP4
DP4 =
Display Point DP5
DP5 =
Display Point DP6
DP6 =
Display Point DP7
DP7 =
Display Point DP8
DP8 =
Text Settings (SET T Command)
NOTE: Enter the following characters: 0–9, A–Z, -, /, ., space for each text label setting, subject to the
specified character limit. Enter NA to null a label.
Local Bit Labels (see Table 3.3 and Table 3.4)
Local Bit LB1 Name (14 characters) NLB1 =
Clear Local Bit LB1 Label (7 characters)
CLB1 =
Set Local Bit LB1 Label (7 characters)
SLB1 =
Pulse Local Bit LB1 Label (7 characters)
PLB1 =
Local Bit LB2 Name (14 characters)
NLB2 =
Clear Local Bit LB2 Label (7 characters)
CLB2 =
Set Local Bit LB2 Label (7 characters)
SLB2 =
Pulse Local Bit LB2 Label (7 characters)
PLB2 =
Local Bit LB3 Name (14 characters)
NLB3 =
Clear Local Bit LB3 Label (7 characters)
CLB3 =
Set Local Bit LB3 Label (7 characters)
SLB3 =
Pulse Local Bit LB3 Label (7 characters)
PLB3 =