MX-2300/2700 N/G SIMULATION 7 – 33
<Setting range and default value of each set value>
26-52
Purpose : Setting
Function (Purpose) : Used to set whether non-printed paper
(insertion paper, cover paper) is counted up
or not.
Section :—
Item :—
Operation/Procedure
1) Enter the set value with 10-key.
* Press [C] key to clear the entered value.
2) When [OK] button is pressed, the entered value is set.
* When [COLOR], or [BLACK] key is pressed, the current set
value is saved to EEPROM and RAM.
<Setting range and default value of each set value>
<List of default values depending on destinations>
26-53
Purpose :Setting
Function (Purpose) : Used to set YES/NO of the auto color cali-
bration.
Section :—
Item :—
Operation/Procedure
1) Enter the set value with 10-key.
* Press [C] key to clear the entered value.
2) When [OK] button is pressed, the current set value is saved to
EEPROM and RAM.
* When [COLOR], or [BLACK] key is pressed, the current set
value is saved to EEPROM and RAM.
<Setting range and default value of each set value>
26-54
Purpose :Setting
Function (Purpose) : Used to set the printer calibration YES/NO.
Section :Printer
Item : Operation
Operation/Procedure
1) Enter the set value with 10-key.
* Press [C] key to clear the entered value.
2) When [OK] button is pressed, and the current set value is
saved to EEPROM and RAM.
After completion of setting, [OK] button returns to the normal
display.
* When [COLOR], or [BLACK] key is pressed, the current set
value is saved to EEPROM and RAM.
<Setting range and default value of each value>
Destination Setting value A Setting value B
U.S.A 1 (Display allowed) 0
CANADA 1 (Display allowed) 0
INCH 1 (Display allowed) 0
JAPAN 1 (Display allowed) 7
AB_B 1 (Display allowed) 0
EUROPE 1 (Display allowed) 0
U.K 0 (Display inhibited) 0
AUS. 1 (Display allowed) 0
AB_A 1 (Display allowed) 0
CHINA 1 (Display allowed) 0
Item Display Content
Setting
range
Default value
A (0:YES
1:NO)
0 White paper
countup (YES)
0 to 1 Refer to <List of default
values depending on
destinations>.
1 White paper
coutup (NO)
Destination Setting value
U.S.A 0 (countup)
CANADA 0 (countup)
INCH 0 (countup)
JAPAN 1 (No countup)
AB_B 0 (countup)
EUROPE 0 (countup)
U.K 0 (countup)
AUS. 1 (No countup)
AB_A 0 (countup)
CHINA 0 (countup)
0
:
A㧦 1
B㧦 0
C㧦 0
; BW REVERSE : YES
;COLOR MODE
;FINISHER FUNCTION : NO
SIMULATION NO.26-50
FUNCTION SETTING
1
㨇 0㨪 1 㨉
O
TEST
CLOSE
0
:
A㧦 1
㧧 (0:YES 1:NO)
SIMULATION
NO.26-52
A BL ANK PAPER COUNT MODE SETUP
1
㨇 0㨪 1 㨉
OK
TEST
CLOSE
Item Display Content
Setting
range
Default
value
A (1:YES 0:NO) 1 ACC YES 0 to 1 1
0 ACC NO
Item Display Content
Setting
range
Default
value
A (1:YES 0:NO) 1 ACC YES 0 – 1 1
0 ACC NO
:
A㧦 1
㧧 (1:YES 0:NO)
SIMULATI ON
NO.26-53
ENABLING OF AUTOMATIC COLOR CALIBRATION
1
㨇 0㨪 1 㨉
OK
TEST
CLOSE
:
A㧦 1
㧧 (1:YES 0:NO)
SIMULATI ON
NO.26
㧙
54
ENABLING OF AUTOMATIC COLOR CALIBRATION OF PRINTER
1
㨇 0㨪 1 㨉
OK
TEST
CLOSE
To Next Page
Loading...
