SICK DL100 Pro - PROFINET IO High Feature - Distance Measuring Device above Alignment Bracket

8021823/126P/2018-12-17 • © SICK AG • Subject to change without notice 33
Mounting
2
Set
Esc
<
<

3
Fig. 13: Mount distance measuring device
1 Knurled screw
2 Alignment bracket
3 Distance measuring device
4. Attach distance measuring device via the knurled screw.
Set
Esc
<
<

Fig. 14: Attach distance measuring device with the knurled screw
1 Knurled screw
6.8 Distance measuring device above alignment bracket
Align the distance measuring device with the alignment bracket according
tothefollowinggures.Thesensorlightspotmusthitthecenterofthe
reector.