SICK DL100 Pro - PROFINET IO High Feature - Module 30: Serial No;I8 B; Module 31: Product Code;I9 W

8021823/126P/2018-12-17 • © SICK AG • Subject to change without notice 95
PROFINET IO-interface
Module parameter
Name Description
Frequency Mode The area "Frequency Mode" only applies for versions with
frequency conversion (DL100-2xxBxxxx).
Changing the laser transmission frequency to avoid impair-
ment from interference with adjacent devices
Value range
• Mode 0
• Mode 1
• Mode 2
Standard value
• Mode 0
10.3.14 Module 30: "Serial No/i8b"
Type Input module, 8 bytes
Description This module can be used to request the device serial number.
Input values
Rel. Adr. Description
0 Display of serial number,
Unusedcharactersattheendofthecharacterchainarelled
up by zero bytes (0x00).
Type
• 8 ASCII characters
10.3.15 Module 31: "Product Code/i9w"
Type Input module, 18 bytes
Description This module can be used to request the device product code.
Input values
Rel. Adr. Description
0 Display of the product code, e.g. DL100-XXXX.
Unusedcharactersattheendofthecharacterchainarelled
up by zero bytes (0x00).
Type
• 18 ASCII characters