SICK DL100 Pro - PROFINET IO High Feature - Module 32: Version Hw;I8 B; Module 33: Version Fpga;I10 W; Module 34: Version Uc;I10 W

PROFINET IO-interface
96 © SICK AG • Subject to change without notice • 8021823/126P/2018-12-17
10.3.16 Module 32: "Version HW/i8b"
Type Input module, 8 bytes
Description This module can be used to request the device hardware serial number.
Note If the value is not present in the device, a zero byte (0x00) is transferred for
every character.
Input values
Rel. Adr. Description
0 Display version number of the device hardware as character
chain in the form of "YYYYWWnnnn" "nnnn" is a serial number.
Type
• 8 ASCII characters
10.3.17 Module 33: "Version FPGA/i10w"
Type Input module, 10 words
Description This module can be used to request the version number of the device's
FPGArmware.
Note If the value is not present in the device, a zero byte (0x00) is transferred for
every character.
Input values
Rel. Adr. Description
0 Display version number of the device hardware as character
chain in the form of "V00.000.000."
Type
• 12 ASCII characters
12 Reserved
Type
• 8 Byte
10.3.18 Module 34: "Version uC/i10w"
Type Input module, 10 words
Description This module can be used to request the version number of the device's
maincontrollerrmware.
Note If the value is not present in the device, a zero byte (0x00) is transferred for
every character.