SICK DL100 Pro - PROFINET IO High Feature - Module 35: Version Uc2;I10 W; Preset - Move to Initialization Position

8021823/126P/2018-12-17 • © SICK AG • Subject to change without notice 97
PROFINET IO-interface
Input values
Rel. Adr. Description
0 Displayversionnumberofthedevice'smaincontrollerrm-
ware as character chain in the form of "V00.000.000."
Type
• 12 ASCII characters
12 Reserved
Type
• 8 Byte
10.3.19 Module 35: "Version uC2/i10w"
Type Input module, 10 words
Description This module can be used to request the version number of the device's
secondcontrollerrmware.
Note If the value is not present in the device, a zero byte (0x00) is transferred for
every character.
Input values
Rel. Adr. Description
0 Displayversionnumberofthedevice'ssecondcontrollerrm-
ware as character chain in the form of "V00.000.000."
Type
• 12 ASCII characters
12 Reserved
Type
• 8 Byte
10.4 "Preset"–movetoinitializationposition
The function "Preset" permits automation of initialization of shelf supply
devices and other rail-bound vehicles during maintenance, commissioning
or exchange.
Duringinitialization,thedesiredoutputvalueissetinadenedposition
(initialization position) (Preset).
NOTE!
When activating the "Preset", the measured value output
of the distance measuring device is not available for a
short time. We recommend performing the "Preset" in
standstill or at very low speeds. The maximum activation
time is typically at 10000 cycles.
Afterrestart,theosetvaluedeterminedinthepresetismaintained.