SICK FLOWSIC600-XT

102 FLOWSIC600-XT · Operating Instructions · 8018846/1BHP/V2-1/2021-05 · © SICK Engineering GmbH
Maintenance
Subject to change without notice
5.2.5 Optional data backup
5.2.5.1 Logbook check and data backup
Page “Logbook Management” provides an overview and a general introduction to the log-
books.
The following functions are available here:
● “Load all logbooks from device”: Load the complete contents of all logbooks in the PC
database.
● “Load all logbooks from database”: Add the overview data that are already on the PC to
the logbook and make them available during the FLOWgate™ session.
● “Clear All Logbooks”: When the logbooks have been loaded from the device, they can be
deleted in the device.
● When a logbook is selected, it is possible to only load/delete this logbook or to export it
to CSV format or as PDF report.
The PDF report is automatically opened and can be printed, saved or sent via e-mail.
Fig. 52 Example: Event logbook
Deleting logbook entries
Logbook entries can be deleted only via the FLOWgate™ operating software with button
“Clear all Logbooks”. Deleting the entries in FLOWSIC600-XT is not possible.
To prevent an overflow of the logbooks and possible data loss, logbook entries
can be saved to the meter database with the FLOWgate™ operating software.
The entries on the meter can then be deleted.