SICK FLOWSIC600-XT

Important information
FLOWSIC600-XT · Operating Instructions · 8018846/1BHP/V2-1/2021-05 · © SICK Engineering GmbH 13
Subject to change without notice
1.4 Responsibility of user
▸
Only put the FLOWSIC600-XT into operation after reading the Operating Instructions.
▸ Observe all safety information.
▸ If anything is not clear: Please contact SICK Customer Service.
1.4.1 Designated users
These Operating Instructions are intended for skilled persons familiar with the following
tasks:
● Installation (setting up/assembly)
● Commissioning
● Handling and monitoring during operation
● Maintenance/service.
● Installation, commissioning, maintenance and inspection may only be carried out by
skilled persons having knowledge of the relevant rules and regulations for potentially
explosive atmospheres, especially:
– Ignition protection types
– Installation regulations
– Zone classification
NOTICE:
Skilled persons are persons in accordance with DIN VDE 0105 or IEC 364, or
directly comparable standards. It is decisive that these persons can recognize
and avoid possible hazards, especially hazards arising from gases dangerous to
health, and hot or pressurized gases.