120 FLOWSIC600-XT · Operating Instructions · 8018846/1BHP/V2-1/2021-05 · © SICK Engineering GmbH
Specifications
Subject to change without notice
8.1 Conformities
8.1.1 CE certificate
The FLOWSIC600-XT has been developed, manufactured and tested in accordance with the
following EU Directives:
● Pressure Equipment Directive 2014/68/EU
● ATEX Directive 2014/34/EU
● EMC Directive 2014/30/EU
● Measuring Instrument Directive 2014/32/EU
Conformity with the above directives has been verified and the device has been marked
with the CE label. The special identification of the pressure devices as demanded in
accordance with Pressure Device Guideline 2014/68/EC, Parts 3.3 and 3.4, can be found
in the Manufacturer Data Report of the FLOWSIC600-XT.
8.1.2 Standards compatibility and type approval
The FLOWSIC600-XT conforms with the following standards or recommendations:
● EN 60079-0:2012, EN 60079-1: 2014, EN 60079-7:2015, EN 60079-11:2012,
EN60079-15:2010,
● EN 60079-26:2015, EN 60079-28:2015, EN 61326-1:2013
● EN 61010-1 (Safety requirements for electrical equipment)
● EN 60529: 1991/A1:2000/A2:2013 (IP)
● AGA Report No. 9, 3rd Edition 2017 “Measurement of Gas by Multipath Ultrasonic
Meters”
● API 21.1 “Flow Measurement Using Electronic Metering Systems”
● BS 7965:2013, “Guide to the selection, installation, operation and calibration of
diagonal path transit time ultrasonic flowmeters for industrial gas applications”
● ISO 17089-1:2019 “Measurement of fluid flow in closed conduits - Ultrasonic meters
for gas - Part 1: Meters for custody transfer and allocation measurement”
● OIML R 137-1&2 Edition 2012 (E) “Gas meters,
Part 1: Metrological and technical requirements,
Part 2: Metrological controls and performance tests”
● OIML D 11 Edition 2013 (E) “General requirements for electronic measuring
instruments”
The device is designed according to the following type approvals:
● Europe: MID approval, DE-16-MI002-PTB001
● GOST 67355-17 (see FLOWSIC600-XT Addendum to the Operating Instructions
“Installation requirements and accuracy of the meter in accordance with Russian type
approval”)
8.1.3 WELMEC conformity
The FLOWSIC600-XT conforms with:
● WELMEC 7.2 Issue 5, “Software Guide”
● WELMEC 11.1 Issue 4, “Common Application for utility meters”
● WELMEC 11.3 Issue 1, “Guide for sealing of utility meters”
To Next Page
Loading...
Need help?
General
