SICK FLOWSIC600-XT User Manual

24 FLOWSIC600-XT · Operating Instructions · 8018846/1BHP/V2-1/2021-05 · © SICK Engineering GmbH
Product description
Subject to change without notice
2.4.2 System requirements
● Microsoft Windows XP/7/8/10
● Min. 1 GHz CPU
● Min. 512 MB RAM
● Approx. 100 MB free memory (without .NET framework)
● USB or serial interface
● Recommended minimum screen resolution: 1024 x 768 pixels, optimum screen resolu-
tion 1368 x 768 pixels
● Microsoft .NET framework 4.0
2.4.3 Access rights
The FLOWSIC600-XT provides not only various access levels but also allows several single
users per access level. Only one user can be logged onto the device at any one time. Three
different users with the same access rights are possible for access levels “User” and
“Authorized user”.
Users with access level “User”, “Authorized user” or “Admin” can create an individual user
name and an individual password.
Users can be managed by “Admin” or SICK Service.
The following functions are available depending on the active access level:
Table 1 Access rights
Device function
Guest User Auth. user Admin
Standard password 1111 2222 3333
Overview X X X X
Read parameters and measured values - X X X
Read archives - X X X
Change parameters not custody relevant - - X X
Change custody relevant parameters - - X X
Air test mode - - X X
Configuration mode - - X X
IO test - - X X
Regional device adaptation - - X X
User management - - - X
The device-specific administrator password can be found in the delivery
documentation (Parameter report p. 2 “User password”).

SICK FLOWSIC600-XT Specifications

General

Brand	SICK
Model	FLOWSIC600-XT
Category	Measuring Instruments
Language	English