SICK FLOWSIC600-XT

Maintenance
FLOWSIC600-XT · Operating Instructions · 8018846/1BHP/V2-1/2021-05 · © SICK Engineering GmbH 97
Subject to change without notice
▸ The FLOWgate™ operating software can be used to test the meter state. System alarms
and User Warnings are indicated in the Status bar.
It is recommended to use the FLOWgate™ operating software to obtain further informa-
tion on the meter‘s state.
5.2.1.2 Function check with FLOWgate
TM
▸ Check the device status.
Table 14 Signaling the device status in FLOWgate
TM
▸ Click on the symbol in the Status bar when warnings or errors exist.
The current Status overview opens and shows details and information on how to
proceed.
Fig. 46 Current status
The “Diagnostics” menu shows under “Meter values” in various profiles all diagnostics
values providing information on the status of the device.
Status Description
Normal operation, neither warnings nor errors exist
Device status warning: At least one warning is pending in the device, the
measured value is still valid.
Device status error: At least one error is pending in the device, the
measured value is invalid.