Important information
FLOWSIC600-XT · Operating Instructions · 8018846/1BHP/V2-1/2021-05 · © SICK Engineering GmbH 11
Subject to change without notice
1.2.3 Hazard through electromagnetic interference
1.3 Intended use
1.3.1 Product identification
See the main type plate on the Signal Processing Unit for information for the identification
of your FLOWSIC600-XT.
Model name
The model names on the type plates identify the various device versions:
Fig. 1 Model name (example)
▸
Detailed description of the model name, see → p. 161, §9.6.
1.3.2 Purpose of the device
The FLOWSIC600-XT measuring system is used for measuring the actual volumetric flow
rate of gases transported in pipelines. Apart from that, the FLOWSIC600-XT can also deter-
mine the actual corrected volume and the sound velocity. Separate meters are available to
determine the gas volume depending on the flow direction.
NOTICE:
Measuring system FLOWSIC600-XT is a Group 1, Class A device in accordance
with EN55011:2009. It is intended for operation in an industrial environment.
In other environments, especially in living areas, it could possibly be difficult to
ensure electromagnetic compatibility due to the occurring conducted as well as
radiated interferences. In this case, the plant operator may be required to take
appropriate measures.
Product name: FLOWSIC600-XT
Manufacturer:
SICK Engineering GmbH
Bergener Ring 27
D-01458 Ottendorf-Okrilla
Germany
F6A - 4P 3D 08 - EA 1A - T218
Product Name
Path Configuration
Installation Length
Nominal Size
Ex Classification
I/O Configuration / Data Interfaces
Ultrasonic Transducer
To Next Page
Loading...
Need help?
General
