SICK FLOWSIC600-XT

40 FLOWSIC600-XT · Operating Instructions · 8018846/1BHP/V2-1/2021-05 · © SICK Engineering GmbH
Installation
Subject to change without notice
3.1 Hazards during installation
WARNING: Hazards during installation work
▸ Do not carry out any welding work on lines with meters fitted.
▸ Comply exactly with mandatory and approved methods.
▸ Observe and comply with regulations of the plant operator.
▸ Meticulously check completed work. Ensure leak tightness.
Otherwise hazards are possible and safe operation is not ensured.
CAUTION: General risks during installation
▸ Observe applicable valid regulations, general standards and guidelines.
▸ Observe local safety regulations, operating instructions and special
regulations.
▸ Observe the safety information in → p. 10, §1.2.
▸ Comply with the safety requirements of Pressure Equipment Directive
2014/68/EC or ASME B31.3 when installing pressure devices including
connection of various pressure devices.
▸ Persons carrying out installation work must be familiar with the directives
and standards applicable for pipeline construction and have the
corresponding qualifications, e.g. in accordance with DIN EN 1591-4.