17 Annex
17.1 Conformities and certificates
You can obtain declarations of conformity, certificates, and the current operating
ins
tructions for the product at www.sick.com. To do so, enter the product part number
in the search field (part number: see the entry in the “P/N” or “Ident. no.” field on the
type label).
17.1.1 EU declaration of conformity
Excerpt
T
he undersigned, representing the manufacturer, herewith declares that the product is
in conformity with the provisions of the following EU directive(s) (including all applicable
amendments), and that the standards and/or technical specifications stated in the EU
declaration of conformity have been used as a basis for this.
•
ROHS DIRECTIVE 2011/65/EU
•
EMC DIRECTIVE 2014/30/EU
•
MACHINERY DIRECTIVE 2006/42/EC
17.2 Note on standards
Standards are specified in the information provided by SICK. The table shows regional
s
tandards with similar or identical contents. Not every standard applies to all products.
Table 57: Note on standards
Standard Standard (regional)
China
IEC 60068-2-6 GB/T 2423.10
IEC 60068-2-27 GB/T 2423.5
IEC 60204-1 GB/T 5226.1
IEC 60529 GB/T 4208
IEC 60825-1 GB 7247.1
IEC 61131-2 GB/T 15969.2
IEC 61140 GB/T 17045
IEC 61496-1 GB/T 19436.1
IEC 61496-2 GB/T 19436.2
IEC 61496-3 GB 19436.3
IEC 61508 GB/T 20438
IEC 62061 GB 28526
ISO 13849-1 GB/T 16855.1
ISO 13855 GB/T 19876
17 ANNEX
104
O P E R A T I N G I N S T R U C T I O N S | safeVisionary2 8025919/1I9E/2023-01-09 | SICK
Subject to change without notice
To Next Page
Loading...
