7.18 Service
Overview
Y
ou can run the following under service:
•
Reboot device
•
Reset the device to factory settings
•
Managing passwords
Prerequisites
•
Exis
ting connection between the configuration software and device
7.18.1 Assigning or changing passwords
Approach
1.
Establish connection to the device.
2. In the device window under the main navigation Service, select the User password
entry.
3. In the User password dialog, select the user group.
4. Enter the new password twice and use Transmit to device to confirm.
5. When you are prompted to log on, select your user group and enter the corre‐
sponding password.
✓
The new password is valid for the user group immediately.
7.18.2 Resetting the password
Overview
If y
ou have forgotten the password of the Admin user group, you can reset it with the
assistance of SICK.
Approach
R
esetting the password
1. Request the form for resetting your password from SICK support.
2. Connect to the device in Safety Designer.
3. In the device window under the main navigation Service, select the User password
entry.
4. In the User password dialog box, select the Start password reset process option.
5. Send the information displayed on the form to SICK support.
✓
You will then receive an activation code.
6. Enter the activation code in the field provided.
7. Read the PRAC (Password Reset Approval Code) from the device, enter it in the
field provided, then confirm.
✓
The password of the Admin user group is reset to factory settings (SICKSAFE). The
Maintenance and Authorized customer user groups are deactivated. The configuration
is not changed.
CONFIGURATION 7
8025919/1I9E/2023-01-09 | SICK O P E R A T I N G I N S T R U C T I O N S | safeVisionary2
79
Subject to change without notice
To Next Page
Loading...
