SICK safeVisionary2 - Buttons on the Toolbar

In the 3D Editor, you can adjust the mounting settings, manage calibration data and
cont
ours, and configure fields or field sets and ROIs or ROI sets.
The 2D view shows the captured scene from the point of view of the camera sensor.
You can use the 2D view to position the camera sensor and configure the ROIs.
The 3D view shows the camera sensor within the room. You can use the 3D view to
position the camera sensor and configure the fields.
Live data can be displayed if the camera is connected.
3D Editor toolbar
T
able 27: Buttons on the toolbar
Button Function
Show 2D view and 3D view in parallel
Show 3D view only
Show 2D view only
Display live measurement data
Show snapshot of the measurement data. Clicking again clears the meas‐
ur
ement data shown.
Show and hide the grippers for rotating about the axes of the device coordi‐
na
te system
Show and hide the grippers for displacing along the axes of the world
coor
dinate system
Align selected object to the floor
Align selected object to the camera system
Delete selected geometries
Create cuboid, aligned to the floor
Create cuboid, aligned to the camera system
Field editor settings
Calculate field sets
Toolbar in the 2D view and 3D view
T
able 28: Buttons on the toolbar
Button Function
Arrow tool, select objects
Shift perspective
Rotate perspective
Zoom tool
Pr
ess and hold the left mouse button and move the mouse up (enlarge
image section) and down (reduce image section).
View Select view
7 CONFIGURATION
64
O P E R A T I N G I N S T R U C T I O N S | safeVisionary2 8025919/1I9E/2023-01-09 | SICK
Subject to change without notice