8 Commissioning
8.1 Switching on
Prerequisites
•
T
he machine has been inspected and released by qualified safety personnel.
•
Protective device works properly.
•
The protection function is checked after each change to the machine or to the
integration or the operating and boundary conditions of the device.
Switching on
W
hen the camera sensor is switched on, the DIAG LED lights up yellow continuously.
When the startup process is complete, the LEDs indicate the current operational status
of the camera sensor.
8.2 Check during commissioning and modifications
The thorough check is intended to ensure that the safety functions are fulfilling their
planned pur
pose and whether persons are being adequately protected.
b
Carry out the checks specified in the test plan of the manufacturer of the machine
and the operating entity.
8 C
OMMISSIONING
80
O P E R A T I N G I N S T R U C T I O N S | safeVisionary2 8025919/1I9E/2023-01-09 | SICK
Subject to change without notice
To Next Page
Loading...
