SICK safeVisionary2 - 13.4 Scanning range

13.4 Scanning range
Protective field range
T
he effective protective field range depends on the application and the configured
object resolution.
Table 51: Protective field range
Resolution Protective field range
Stationary application Mobile application
Hand 1m 1m
Arm 1.6m 1.6m
Leg 2m 2m
Body 2m
4m in Increased scanning range
mode
2m
4m in mode Increased scanning range
1)
1)
The increased scanning range in mobile applications can affect the availability of the device.
Scanning range of the contour detection field
T
he effective scanning range of the contour detection field depends on the application
and the configured object resolution.
Table 52: Scanning range of the contour detection field
Resolution Scanning range of the contour detection field
Stationary application Mobile application
Hand 1m 1m
Arm 1.6m 1.6m
Leg 2m 2m
Body 2m
4m in Incr
eased scanning range
mode
2m
4m in mode Increased scanning range
1)
1m × 1m (open‐
in
g)
– 4m
40cm × 40cm
(opening)
– 2m
1)
The increased scanning range in mobile applications can affect the availability of the device.
Scanning range of the ROI measurement function
The scanning range of the ROI measurement function is limited to 4m.
Warning field range
F
or non-safety applications, the safety camera sensor has a higher scanning range than
the maximum protective field range. The scanning range is limited to 7.3m for warning
fields.
In order to reliably detect an object at 7.3m, the object must be at least 174mm in
size and have a remission of at least 60%.
TECHNICAL DATA 13
8025919/1I9E/2023-01-09 | SICK O P E R A T I N G I N S T R U C T I O N S | safeVisionary2
95
Subject to change without notice