SICK safeVisionary2 - Assigning Field Sets and ROI Sets; Assigning a Defined Cut-Off Behavior; Data Output

You need a cut-off path for every field in a field set and for every ROI in an ROI set.
If t
he field sets/ROI sets have different sizes, use the field set/ROI set with the most
fields/ROIs as a guide.
Approach
1. Click on the Add cut-off path button.
2. If applicable, enter a meaningful name for each cut-off path.
3. Select the outputs that the cut-off path should switch.
7.12.5 Assigning field sets and ROI sets
Overview
On t
he right in the Field sets area, the created field sets are listed under Fields.
The created ROI sets are listed under ROIs.
Approach
A
ssign a field set/ROI set to a monitoring case.
b
Assign a field set/ROI set to a monitoring case using drag and drop.
Delete a field set/ROI set assignment.
b
Drag a field set/ROI set from a monitoring case onto the trash can icon.
7.12.6 Assigning a defined cut-off behavior
Overview
In a monitoring case, you can assign a defined cut-off behavior to a cut-off path
instead of a field:
•
Always OFF: If the monitoring case becomes active, the cut-off path is in the OFF
state.
•
Always ON: If the monitoring case becomes active, the cut-off path is in the ON
state.
Approach
A
ssigning a defined cut-off behavior
b
Assign a cut-off behavior to a cut-off path in a monitoring case using drag-and-
drop.
Complementary information
If you have not assigned fields to certain cells in a monitoring case table, Safety
Designer automatically assigns the Always OFF function to these cells.
7.13 Data output
Overview
D
ata output can be used for general monitoring and control tasks. This data is used in
particular for providing navigation support for AGVs (automated guided vehicles). This
data must not be used for safety-related applications.
Send Mode
•
D
eactivated: No data output
•
Continuously to a target computer (router settings are configured via "Network settings"):
Data output continuously or at every xth measurement via UDP to a defined
destination address
CONFIGURATION 7
8025919/1I9E/2023-01-09 | SICK O P E R A T I N G I N S T R U C T I O N S | safeVisionary2
75
Subject to change without notice