SICK safeVisionary2 - 7.12 Monitoring cases

7.12 Monitoring cases
Overview
Figure 33: Monitoring cases
1
Settings for the whole monitoring case table
2
Settings for the individual monitoring case
3
Input conditions for a monitoring case
4
Field set in the monitoring case and in the cut-off path
5
Cut-off paths for fields and ROIs
6
Configurable field sets and ROI sets
7
Areas for defined cut-off behavior
8
Remove field set from a monitoring case
In the monitoring case editor, you can also define the monitoring cases with input
condit
ions and assign the field sets/ROI sets.
7.12.1 Settings for monitoring case tables
Name
In t
he Name field, you can enter a meaningful name for the monitoring case table.
Inputs used
Y
ou choose the inputs that you would like to use for switching between monitoring
cases in the monitoring case table.
CONFIGURATION 7
8025919/1I9E/2023-01-09 | SICK O P E R A T I N G I N S T R U C T I O N S | safeVisionary2
73
Subject to change without notice