1 About this document
1.1 Scope
Product
T
his document applies to the following products:
•
Product code: safeVisionary2
•
“Operating instructions” type label entry: 8025917
Document identification
Doc
ument part number:
•
This document: 8025919
•
Available language versions of this document: 8025917
You can find the current version of all documents at www.sick.com.
1.2 Target groups of these operating instructions
Some sections of these operating instructions are intended for certain target groups.
Ho
wever, the entire operating instructions are relevant for intended use of the product.
Table 1: Target groups and selected sections of these operating instructions
Target group Sections of these operating instructions
Project developers (planners, developers,
de
signers)
"Project planning", page 22
"Configuration", page 55
"Technical data", page 90
"Accessories", page 100
Installers "Mounting", page 51
Electricians "Electrical installation", page 53
Safety experts (such as CE authorized repre‐
sent
atives, compliance officers, people who
test and approve the application)
"Project planning", page 22
"Configuration", page 55
"Commissioning", page 80
"Technical data", page 90
"Checklist for initial commissioning and com‐
missioning", page 106
Operators "Operation", page 81
"T
roubleshooting", page 84
Maintenance personnel "Maintenance", page 83
"T
roubleshooting", page 84
1.3 Further information
www.sick.com
T
he following information is available via the Internet:
•
Data sheets and application examples
•
CAD files and dimensional drawings
•
Certificates (such as the EU declaration of conformity)
•
Guide for Safe Machinery. Six steps to a safe machine
•
Safety Designer (software for configuring safety solutions made by SICK AG)
1.4 Symbols and document conventions
The following symbols and conventions are used in this document:
ABOUT THIS DOCUMENT 1
8025919/1I9E/2023-01-09 | SICK O P E R A T I N G I N S T R U C T I O N S | safeVisionary2
7
Subject to change without notice
To Next Page
Loading...
