°
Is t
he protective device severely contaminated?
°
Are the front screens contaminated, scratched or badly damaged?
°
Has the protective device’s alignment been changed?
°
Are there any objects (e.g., cables, reflective surfaces) in the protective field?
If one of the points applies, the machine should be shut down immediately. In this
case, the machine and the protective device must be checked by appropriately qualified
safety personnel.
4 P
ROJECT PLANNING
50
O P E R A T I N G I N S T R U C T I O N S | safeVisionary2 8025919/1I9E/2023-01-09 | SICK
Subject to change without notice
To Next Page
Loading...
