SICK safeVisionary2 - Page 52

Approach
11
1
M5 threaded mounting hole at the bottom
Direct mounting using the threaded holes at the bottom of the device
b
Use all of t
he M5 threaded holes at the bottom of the device so the values given in
the data sheet for vibration and shock resistance are achieved.
b
Maximum depth of thread engagement: 7.5mm.
b
Tightening torque: 2.5Nm.
b
In case of strong vibrations, use screw locking devices to secure the fixing screws.
1
1
1
M5 threaded mounting hole at the side
Direct mounting using the threaded holes at the sides
b
Use all of the M5 threaded holes at the sides so the values given in the data sheet
for vibration and shock resistance are achieved.
b
Maximum depth of thread engagement: 5.5mm.
b
Tightening torque: 2.5Nm.
b
In case of strong vibrations, use screw locking devices to secure the fixing screws.
Complementary information
To facilitate mounting and alignment, SICK offers mounting kits as accessories.
Further topics
•
"Pr
oject planning", page 22
•
"Brackets", page 100
5 MOUN
TING
52
O P E R A T I N G I N S T R U C T I O N S | safeVisionary2 8025919/1I9E/2023-01-09 | SICK
Subject to change without notice