SICK VISIC100SF - Device Adjustment Using Submenu Item Tuning

66
8017171/115Z/V3-0/2019-01| SICKO P E R A T I N G I N S T R U C T I O N S | VISIC100SF
Subject to change without notice
VISIC100SF MENU NAVIGATION
5.6.12 Device adjustment using submenu item “Tuning”
Function for performing device adjustment onsite. Description of the visibility test with VIS
test tool see “Visibility test with VIS test tool”, page 89.
Fig. 54: Performing device adjustment
Menu item “Tuning” is only available when menu item “Maint” has been set to “active”,
see “Activating the setting range via menu item “Maint””, page 53.
RUN
k
XXX
Set
SET
Maint
Esc
2 s
>
>
... ...
SET
Tuning
Esc
Set
Set
SET
Setval
Esc
Star t?
Set
Esc
>
>
Adjust
RUN
Call ...
2 s
Esc
Fail
OK
SET
SET
SET
SET
SET
Set
Esc
XXX
SET
The test takes 2 seconds. Afterwards the display shows for 1 second whether the test
was successful (”ok”) or not successful (“Fail”).