SICK VISIC100SF - Operating Elements; Leds

68
8017171/115Z/V3-0/2019-01| SICKO P E R A T I N G I N S T R U C T I O N S | VISIC100SF
Subject to change without notice
MENU NAVIGATION TAD CONTROL UNIT
6.4 Operating elements
Fig. 55: Operating and display elements (with menu example)
▸ To activate a function button: Simply touch the button surface with a finger.
6.4.1 LEDs
MAINTENANCE
FAILURE
MEAS
POWER
REQUEST
Select Language 2.4
Status: Measuring
./Para/Lang/
Back
Enter
 Current menu branch
 Current menu
 Status bar
 Index
 Status LED
 Contrast icon, see “Setting the display contrast”, page 73.
 “MEAS” button
 Scroll bar
 Function buttons, see “Function buttons”, page 69.
4
3
2
1
5
5
5
6
79
9
9
9
1 English
2 Deutsch
3 Français
4 Español
8
The display lighting switches off automatically after 15 minutes.
LED
Significance/possible causes
POWER
The TAD control unit is switched on, power voltage is available.
FAILURE
● At least one error code is active.
● The “Maintenance operation” state is activated manually.
MAINTENANCE
REQUEST
A MRq code is active on at least one sensor.