SICK VISIC100SF - 1 Important Information; About this Document; Responsibility of User

8
8017171/115Z/V3-0/2019-01| SICKO P E R A T I N G I N S T R U C T I O N S | VISIC100SF
Subject to change without notice
IMPORTANT INFORMATION
1 Important information
1.1 About this document
● This Manual describes:
– Device components
–Installation
–Operation
– Maintenance work required
● It contains important safety information for safe operation.
1.2 Responsibility of user
▸ Read the Operating Instructions before putting the VISIC100SF into operation.
▸ Observe all safety information.
▸ If anything is not clear: Please contact SICK Customer Service.
Designated users
The VISIC100SF may be operated by competent persons only who, based on their device-
specific training and knowledge of the device as well as knowledge of the relevant
regulations, can assess the tasks given and recognize the hazards involved.
Correct use
● This Manual presumes that the VISIC100SF has been delivered as specified during
project planning (e.g., for use in a tunnel) and with the relevant delivery state of the
VISIC100SF (→ delivered System Documentation).
● If you are not sure whether the VISIC100SF complies with the planned configuration or
the delivered System Documentation:
▸ Please contact SICK Customer Service.
● The VISIC100SF should only be used as described in these Operating Instructions, see
“Purpose of the device”, page 9. The manufacturer assumes no responsibility for any
other use.
● Maintenance work should be performed as prescribed in this Manual.
● Do not attempt any work on or repairs to the VISIC100SF unless described in this
Manual.
● Do not modify the VISIC100SF in any way unless specifically instructed and permitted to
do so by the manufacturer.
Failure to observe these precautions could result in:
– Voiding the manufacturer‘s warranty.
– Causing the VISIC100SF to become dangerous.
Special local conditions
▸ Follow all local laws, regulations, and company policies applicable at the installation
location.
Retention of document
These Operating Instructions:
● Must be available for reference.
● Must be conveyed to new owners.