75
8017171/115Z/V3-0/2019-01/ SICK OPERATING INSTRUCTIONS | VISIC100SF
Subject to change without notice
MENU NAVIGATION TAD CONTROL UNIT
6.7 Main menu item “Diagnosis”
The following data can be retrieved under main menu item “Diagnosis”:
● Next maintenance (gas cells)
● Uptime: Operating duration information
● Device Info
● Peripheral
● Messages: Current error and maintenance request messages
● Gas test: For performance of reference measurements of the gas cells
● I/O test: Test of analog and status outputs
Fig. 65: Main menu item “Diagnosis”
1 Next Maintenance
2 Uptime
3 Device Info
4 Peripheral
Enter
Status: Measuring
/Diag/
Back
Diagnosis 2
Current device errors can only be displayed via the “Diag” button or “Diagnosis/
Messages”.
When no gas sensors are installed, the submenu items “Next Maintenance” and “Gas
Test” will not be displayed under menu item 2 “Diagnosis”.
To Next Page
Loading...
