73
8017171/115Z/V3-0/2019-01/ SICK OPERATING INSTRUCTIONS | VISIC100SF
Subject to change without notice
MENU NAVIGATION TAD CONTROL UNIT
6.5.7 Setting the display contrast
1 Press the “MEAS” button for 3 seconds.
>>>
The measuring screen appears first.
>>>
Then the menu to set the contrast appears.
Fig. 62: Menu to set the contrast
2 Select / until the desired setting is reached.
3 Save the values with “Save”.
6.5.8 Changing numerical parameters (password input)
Fig. 63: Changing numerical parameters (example)
1 To move the cursor: Select .
2 To change the selected digit: Select until the desired digit is displayed.
3 To set the displayed value: Select “Save”.
4 To abort the process: Select “Back”.
← Current setting
Status: Measuring
Contrast value: 41
22
Back
Save
64
← Graphic for current setting
← Setting range
PROFIBUS ID 3.3
Status: Measuring
./Para/ID
Back
Save
0125
Min.:0
125
Max. : 125
XXXX
Password
The password 1234 is predefined at the factory.
To Next Page
Loading...
