Installation
122/214 Revision 06 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DB10 • 864-5091.9
Gas-insulated bar without three-position disconnector
➭ Remove the covers ① . To do this, remove the 8 bolts M8 x 20 and the nuts.
Reuse the bolts for fixing the gas-insulated bar.
Fig. 136: Removing the covers ①
Fig. 135: Overview of busbar component: Gas-insulated bar
without three-position disconnector
① Gas-insulated bar with integrated pressure ring ( ② )
②
Connection housing for gas-insulated bar
③
Intermediate ring
④
Busbars
⑤
Busbar housing
To Next Page
