AddFEM
Commissioning / Operation / Maintenance
5-49
AddFEM
C79000–G8076–C900–03
The FEM_AI has the following input parameters (continued):
Parameter Comment Data type Visible Default
AI8_SIM Simulation Value Analog Input 8 REAL No 0.0
SIMUAI8 1 = Simulation on BOOL No 0
AI9_HRG Analog Input 9 High Range REAL Yes 100.0
AI9_LRG Analog Input 9 Low Range REAL Yes –100.0
AI9_SIM Simulation Value Analog Input 9 REAL No 0.0
SIMUAI9 1 = Simulation on BOOL No 0
AI10_HRG Analog Input 10 High Range REAL Yes 100.0
AI10_LRG Analog Input 10 Low Range REAL Yes –100.0
AI10_SIM Simulation Value Analog Input 10 REAL No 0.0
SIMUAI10 1 = Simulation on BOOL No 0
AI11_HRG Analog Input 11 High Range REAL Yes 100.0
AI11_LRG Analog Input 11 Low Range REAL Yes –100.0
AI11_SIM Simulation Value Analog Input 11 REAL No 0.0
SIMUAI11 1 = Simulation on BOOL No 0
AI12_HRG Analog Input 12 High Range REAL Yes 100.0
AI12_LRG Analog Input 12 Low Range REAL Yes –100.0
AI12_SIM Simulation Value Analog Input 12 REAL No 0.0
SIMUAI12 1 = Simulation on BOOL No 0
CO1_NUM Number of Teeth for Counter 1 INT No 60
CO1_SIM Simulation Value Counter 1 REAL No 0.0
SIMCO1 1 = Simulation on BOOL No 0.0
CO2_NUM Number of Teeth for Counter 2 INT No 60
CO2_SIM Simulation Value Counter 2 BOOL No 0.0
SIMUCO2 1 = Simulation on BOOL No 0
CO3_NUM Number of Teeth for Counter 3 INT No 60
CO3_SIM Simulation Value Counter 3 REAL No 0.0
SIMUCO3 1 = Simulation on BOOL No 0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
