Engineering via SICAM WEB
456 Unrestricted SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
The target device starts the loading procedure. The duration of the loading procedure de-
pends on the file size and the used communication connection.
Subsequently the file is checked upon validity.
If the data is not valid or if the file size exceeds 10 MB, an error information is displayed.
• Close the dialog with
If the data is valid, it is written on the SD card of the target device.
After successful upload the following dialog appears:
• Confirm the procedure with
Subsequently the following dialog appears:
You have the possibility to abort the restart of the device and to update further firmware.
• Click on the button in order to restart the device
Note
During loading procedures the website must not be left. The selection of another website may lead to the
occurrence of undefined states.
With startup the uploaded file will be stored on the SD card under \ETx5\5_<BSE>_<ZSE>.icd.
To Next Page
Loading...
