DCA Vantage Operator’s Guide 117
Maintenance
6. Remove and dispose of the blown fuse.
Figure 45 Fuse
7. Insert the spare fuse onto the fuse block.
8. Insert the fuse holder into the system.
Setting Maintenance Reminders
Use the Maintenance Reminders screen to access the Maintenance Task Log,
and to view, set, or change the schedule for the maintenance tasks. The
default setting is that none of the Maintenance Reminders are selected. After
you select the check box for a specific reminder, Schedule becomes active.
1. At the Home screen, select Menu.
2. At the Menu screen, select
System Settings.
3. At System Settings, select
Additional Settings.
4. At the Additional Settings menu, select
Maintenance.
5. To set a maintenance reminder, select the check box.
The maintenance reminder is set and Schedule becomes active.
6. To view the schedule, select
Schedule.
7. To change the schedule, select
Change.
The Maintenance Reminder Frequency screen displays.
1
Fuse
2
Fuse Block
To Next Page
Loading...
