96 DCA Vantage Operator’s Guide
Maintenance
1. At the Home screen, select Turn Off.
A message displays asking if you want to shut down the system.
2. To shut down the system, select
Yes.
The system begins shutting down.
3. After shutdown completes, turn the power switch to the off position.
NOTE: Wait until shutdown completes before turning the power switch to the
off position.
Cleaning the Onboard Barcode Reader Window
Materials Required:
• lint-free cloth
• water or ethanol
1. Clean the barcode window with a lint-free cloth dampened with water or
ethanol.
Figure 31 Cleaning the Onboard Barcode Reader Window
2. Connect the power cord after the barcode window is clean and dry.
WARNING
Turn the power off and disconnect the power cord before cleaning
the barcode window.
1
Onboard Barcode Reader
To Next Page
Loading...
