60 DCA Vantage Operator’s Guide
Operating the System
If you select the Full Report option, all of the information that displays on the
screen prints in the report.
If you select the Short Report option, a subset of the displayed information
prints in the report.
If you have enabled Auto Send, the system sends the test results
automatically to the LIS as soon as the test has completed. If you enter or
modify the patient demographic data, the system automatically saves the
changes and sends the test results to the LIS when you select
Next on the Edit
User Data screen.
HbA
1c
Test Results
The system displays the following information for each patient HbA
1c
test.
You have to enable some of the data entries in System Settings. For more
information, see Setting Patient Data Entry‚ page 151.
Result Description
System Serial Number
The serial number of the DCA Vantage
system.
Test Name
The type of test, either Microalbumin/
Creatinine test or HbA
1c
test.
Sample Sequence Number The sample sequence number.
Transmission Status The transmission status of the record.
Cartridge Lot Number The lot number of the cartridge.
Test Cartridge Scan Date and Time
The date and time the test cartridge was
scanned.
Sample ID
The sample ID, if you entered one into
the system.
Patient ID
The patient ID, if you entered one into
the system.
Patient Last Name
The last name of the patient, if you
entered one into the system.
Patient First Name
The first name of the patient, if you
entered one into the system.
Operator ID
The Operator ID, if you entered one into
the system.
Comment 1–8
Any comments you entered regarding
the patient.
To Next Page
Loading...
